Supplies

PREMIUM Double sided Grip Tape (2" or 3/4" widths available): This is a thick, high quality 2-sided tape (Inter Tape) that works great for re-gripp...

IMPORTANT: Measure the INSIDE diameter (ID) of the butt end of the shaft first to determine what size extender you need. Normally shaft manufactur...

WHAT YOU NEED TO KNOW 12 ct ferrules iron shafts Available for iron shafts with OD 0.370"or 0.355" Available in lengths: 1", 3/4", 1/2", 1/4 (fo...

WHAT YOU NEED TO KNOW Shaft butt extensions for steel shafts Increase the lengths of your clubs Choose from .580" or .600" diameter Comes as a do...

WHAT YOU NEED TO KNOW Quick curing epoxy (2 bottle) kit Superior bond strength on all shaft types Easy-to-use squeeze bottles 1:1 mix ratio by vo...

IMPORTANT NOTE Make sure to shake the bottle well (with the cap screwed on tightly) before applying. Let the grips dry upside down and ensure the ...

WHAT YOU NEED TO KNOW 12 ct ferrules wood shafts Available for wood shafts with OD 0.335" or 0.350" Available in lengths: 1", 3/4", 1/2", 1/4 (f...

WHAT YOU NEED TO KNOW Universal converter brass shim for woods or irons Adapts the following hosel tip sizes: .335 to .350, .355 to .370, and .335...

WHAT YOU NEED TO KNOW Available in 8 oz. kit (2x 4oz bottles), 16 oz. kit (2x 8oz bottles), or 32 oz. kit (2x 16oz bottles) Superior bonding capab...

"Build Up" Single sided masking tape - 2" x 60 yards This is an all purpose thick, high quality single-sided tape. Thickness: 0.147mm.

WHAT YOU NEED TO KNOW 5 MIL Lead foil tape: 1/2" x 100" roll Used for adding weight to an assembled golf club IMPORTANT The actual golf equipment...

WHAT YOU NEED TO KNOW .58 oz. adhesive kit Double-barreled tube dispenses an exact 1:1 mix Excellent adhesion on steel, graphite, titanium, and c...

WHAT YOU NEED TO KNOW Replacement hooked knife blades For standard utility knives Sold as 5 pcs per pack

WHAT YOU NEED TO KNOW TaylorMade Factory black ferrule for wood shafts Fits LDR, R15, M1, M2 models Tip size: .335" RH option only FULL DESCRIP...

The Replacement Grip Remover Needle works with a Pressurized Grip Remover Injector. Use the needle to injecting solvent directly into the grip, to ...

WHAT YOU NEED TO KNOW 1.5oz Cartridge + Easy-to-Push Dispenser kit Double-barreled tube dispenses an exact 1:1 mix Excellent adhesion on steel, gr...

IMPORTANT NOTE Make sure to shake the bottle well (with the cap screwed on tightly) before applying. Let the grips dry upside down and ensure the ...

WHAT YOU NEED TO KNOW 12 ct ferrules iron shafts Available for iron shafts with OD 0.370" Available in lengths: 1/2" Taper shaped, Non-Collared C...

WHAT YOU NEED TO KNOW Tool to measure graphite shaft diameter (ID) 15 different size Also measures most steel shafts Does not include Shaft Extend...

Use this rubber shaft clamp to keep your shaft in place while re-gripping your clubs!

WHAT YOU NEED TO KNOW Removes grip tape off of graphite and steel shafts Will not scratch shafts. It can be re-sharpened using a belt sander follo...

WHAT YOU NEED TO KNOW Ideal for installing bubble grips Minimizes chance of splitting grips Opens up the grip to enable quicker installation Works...

WHAT YOU NEED TO KNOW 12 ct ferrules wood shafts Available for wood shafts with OD 0.335" Available in lengths: 1", 3/4", 1/2" Taper shaped, Non...

WHAT YOU NEED TO KNOW (14ct) Premium double-sided tape strips (2" x 10") - solvent activated (1) Bottle 4oz HF-100 activator solvent (1) Rubber c...